Warlander

Deedplanner 2.9.9 - 3D House And Deed Planner

Recommended Posts

When you are in height setting mode, you can set two different heights at once - one with left mouse button (LMB) and second with right mouse button (RMB). This can be used if you - for example - have one common height used on your deed with some terraces. You can set either LMB or RMB to the common height and only change the second one to quickly modify heights on your deed.

Share this post


Link to post
Share on other sites

i have an issue you might be able to fix or look at i put it on this 

there are pics and all. could you look into that when you not super busy. its been like this for nearly a year now. 

Share this post


Link to post
Share on other sites
6 hours ago, Dracaa said:

i have an issue you might be able to fix or look at i put it on this 

there are pics and all. could you look into that when you not super busy. its been like this for nearly a year now. 

 

I posted a workaround in that thread.

Share this post


Link to post
Share on other sites

gdljVhV.jpg

 

The screen above is a test of per-camera rendering, currently just grid rendering - foundation to be able to use different cameras for different tasks (for example, one camera being above ground while the other one sits below the ground).

 

Low-level rendering haunts me even in Unity. :ph34r: (it's much easier and clean to use and render such grids using raw GL calls rather than components built into Unity which work well, but don't really handle this specific case of DeedPlanner's uniform, multi-colored and frequently changing grid)

Share this post


Link to post
Share on other sites

I updated Win 10 this morning to version 1809 (it was a big update and I think it was the October update) and deedplanner started freezing up my system when navigating around in 3d view after a bit on a secondary monitor with 2 game clients open on the main. Updated my graphics driver in between freezes and that didn't fix it. No java updates available and latest downloadable version of deedplanner (2.9.8)

 

Desktop system with GTX 970. Seems to be directly related to the windows update.

 

Any ideas. I have to force reboot my system to recover when it freezes (music/sounds continue during freeze)

 

Can't really find anything in the logs. It doesn't put anything in the error log. The other log just shows the graphics loop.

Edited by LionIX

Share this post


Link to post
Share on other sites

Is there anything useful in error log? My careful guess is that - under some condition that's unknown to me yet - DeedPlanner fails when trying to render something and then fails again to exit the render pipeline correctly, quickly overflowing the GPU with commands, but I didn't managed to find exact cause yet.

Share this post


Link to post
Share on other sites

Hey ho,

i got the same problem too.
Start to plan a deed and after a short time mostly if i try to go to the 3D view it crashes and only the reset butten of my PC works.
I think that some things like an oven or a staircase could cause that problem but im not 100% sure.
Got 3 full crashes so far, all of them includes staircases in 3D view.

 

I got an error log too. But i dont think its helpfull.
ErrorLog

 

Greetings

 

My PC settings:
Windows 10
Intel I7-2600k @ 3,4GHz
Nvidia G-Force 1060 GTX 6GB
24 GB RAM

Share this post


Link to post
Share on other sites

I noticed a small issue with the Materials Counter the other day when constructing a house.

 

After a bit of testing it looks like DeedPlamner doesn't have the correct materials for the Spiral staircases.

Checking the materials in the program tells me they cost: 10 Shafts, 15 Planks, 1 Small nail, and 1 Large nail.

It's giving that result to me for both the with and without banister versions of the spiral staircase.

 

When they actually require:

Without banisters: 20 Planks, 20 Stone bricks, 20 Mortar, 2 Small nails, 1 Large nail

With banisters: 20 Planks, 20 Stone bricks, 15 Shafts, 20 Mortar, 5 Small nails, 1 Large nail

 

Edit: After looking at  the wiki it appears they are being counted as if they were a Standalone Staircase. That is the staircase that matches the materials it has been listing.

 

Edited by Chromega

Share this post


Link to post
Share on other sites

hi sorry, can you add in the other Hedges from the game into this please and thank you. I would really love to see what Camellia and Oleander hedges look like on my deed.

Share this post


Link to post
Share on other sites

DeedPlanner 2.9.9 released! Changes:

  • Added new hedge types
  • Added large epic portal
  • Fixed material count for bee hives
  • Fixed material count for spiral staircases

This will likely be the last 2.x update other than fixes for program breaking bugs (if such will be found or traced down), all dev time will go towards DeedPlanner 3 now. :)

Share this post


Link to post
Share on other sites
3 hours ago, Warlander said:

DeedPlanner 2.9.9 released! Changes:

  • Added new hedge types
  • Added large epic portal
  • Fixed material count for bee hives
  • Fixed material count for spiral staircases

This will likely be the last 2.x update other than fixes for program breaking bugs (if such will be found or traced down), all dev time will go towards DeedPlanner 3 now. :)

And what, pray us, will v3 have in store?

Share this post


Link to post
Share on other sites
Just now, Nomadikhan said:

And what, pray us, will v3 have in store?

 

Very early version (I think I need at least 1, maybe 2 months before first mostly feature complete version), but biggest changes are:

  • optimized (and much prettier) graphics
  • 3d editing
  • multi-screen editing
  • web version with the same features as desktop one, maybe something for Android in a future as well

In addition, as I go through DP 2.x features I'm improving them on the go. (for example, placing diagonal roads is much easier and faster now - instead of current widget to select what kind of tile you want to put on map there is a single toggle enabling/disabling corner editing. When this mode is enabled, corners can be simply put on map by clicking near tile corner)

exl6vnd.jpg

Share this post


Link to post
Share on other sites

Small status update, recently finished walls loading, roofs were done previously as well (also, some floors on the screen as well):

 

F2EZW6J.jpg

Share this post


Link to post
Share on other sites
Posted (edited)

hi 

I get some strange error 

Im using DeedPlanner 2.9.9 (downloaded it today)

After build up my house  in 4 floors

and start to make staircase up and then make innerwalls  

while looking around inside house, so its how I like it, computer freeze up and I cant do anything, not even ctrl+alt+del work 

I have to force restart comp 

It have happen now 4 times after one another

(Will try once again now, and edit post if it (or not) happend this time to )

 

 

EDIT: no idea why prg freezed up 4 times but 5th time it worked like it should 

and I got no files to send you since it only freeze and not crasched 😕

but Im happy it worked for me now :) 

now to get material and start  to build  :)

 

Edited by Maiya

Share this post


Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now