Sign in to follow this  
Warlander

Deedplanner 2.9.10 - 3D House And Deed Planner

Recommended Posts

 

34 minutes ago, Warlander said:

Small status update, I got my (engineering) thesis printed and framed today, so DeedPlanner and Wurm development will return back to normal soon... Trust me, I'm (almost) an engineer! :)

 

If all goes well, I should have large update ready before the end of February.

 

Congrats Warlander!!  :D

Share this post


Link to post
Share on other sites
On 1/18/2018 at 1:30 AM, Warlander said:

Small status update, I got my (engineering) thesis printed and framed today, so DeedPlanner and Wurm development will return back to normal soon... Trust me, I'm (almost) an engineer! :)

 

If all goes well, I should have large update ready before the end of February.

 

Yayyyyyyyyyyyy!!!!!!!!!!!! Well done!

Share this post


Link to post
Share on other sites
On 1/17/2018 at 11:30 PM, Warlander said:

Small status update, I got my (engineering) thesis printed and framed today, so DeedPlanner and Wurm development will return back to normal soon... Trust me, I'm (almost) an engineer! :)

 

If all goes well, I should have large update ready before the end of February.

 

Congratulations.

Share this post


Link to post
Share on other sites

Thanks for this amazing tool!

 

A couple random bugs I have spotted and would like to report:

 

- The "crate rack" and "rack for empty bsb" objects seems to be missing

- Can't place high iron fence on arch wall sections (they should not replace the wall)

- I get a Java error when adding a freedom wagon object (java.io.FileNotFoundException: Data\Objects (Access is denied))

Edited by Hodor
  • Like 1

Share this post


Link to post
Share on other sites
4 hours ago, Hodor said:

Thanks for this amazing tool!

 

A couple random bugs I have spotted and would like to report:

 

- The "crate rack" and "rack for empty bsb" objects seems to be missing

- Can't place high iron fence on arch wall sections (they should not replace the wall)

- I get a Java error when adding a freedom wagon object (java.io.FileNotFoundException: Data\Objects (Access is denied))

I get the error as well with freedom wagon placement.  Ignoring the error seems fine, as the object does get placed and deedplanner continues to function fine.

Share this post


Link to post
Share on other sites

Is there any chance to put separate label for each level? Couse if I name for example room on the first floor (BLACKSMITH), then all other levels got the same label.

Or maybe I'am doing something wrong?

 

Thanks

 

 

  • Like 1

Share this post


Link to post
Share on other sites
1 hour ago, Wilczan said:

Is there any chance to put separate label for each level? Couse if I name for example room on the first floor (BLACKSMITH), then all other levels got the same label.

Or maybe I'am doing something wrong?

 

Thanks

 

 

 

Sounds like a good idea, I will take a look at it. :)

  • Like 1

Share this post


Link to post
Share on other sites

I can not seem to run deed planner. I get this error message

 

[2018-02-04 09:48:56] Error has occurred!
Java vendor: Oracle Corporation
Java version: 1.8.0_161
DeedPlanner 2.8.8
java.lang.NullPointerException
    at pl.wurmonline.deedplanner.input.Keybindings.prepareKeybindings(Keybindings.java:149)
    at pl.wurmonline.deedplanner.input.Keybindings.<init>(Keybindings.java:58)
    at pl.wurmonline.deedplanner.logic.LogicLoop.<init>(LogicLoop.java:38)
    at pl.wurmonline.deedplanner.MainLoop.<init>(MainLoop.java:17)
    at pl.wurmonline.deedplanner.MapPanel.<init>(MapPanel.java:34)
    at pl.wurmonline.deedplanner.MapPanel.<init>(MapPanel.java:22)
    at pl.wurmonline.deedplanner.forms.Planner.initComponents(Planner.java:174)
    at pl.wurmonline.deedplanner.forms.Planner.<init>(Planner.java:34)
    at pl.wurmonline.deedplanner.forms.Loading.lambda$new$32(Loading.java:38)
    at java.lang.Thread.run(Unknown Source)

 

HELP Please

Share this post


Link to post
Share on other sites

2.9 will bring major interface changes, small teaser below (still subject to change):

 

OGfSoga.png

 

It's possible to put the toolkit on a left side of a screen if someone is used to that. :)

  • Like 4

Share this post


Link to post
Share on other sites

[2018-02-10 11:49:39] Error has occurred!
Java vendor: Oracle Corporation
Java version: 1.8.0_161
DeedPlanner 2.8.10
java.lang.NullPointerException
    at java.util.Arrays.stream(Arrays.java:5004)
    at pl.wurmonline.deedplanner.forms.Loading.lambda$new$32(Loading.java:35)
    at java.lang.Thread.run(Thread.java:748)

 

 

I get this error when ever I try and start it.

Edited by Korhaka

Share this post


Link to post
Share on other sites
1 hour ago, Korhaka said:

[2018-02-10 11:49:39] Error has occurred!
Java vendor: Oracle Corporation
Java version: 1.8.0_161
DeedPlanner 2.8.10
java.lang.NullPointerException
    at java.util.Arrays.stream(Arrays.java:5004)
    at pl.wurmonline.deedplanner.forms.Loading.lambda$new$32(Loading.java:35)
    at java.lang.Thread.run(Thread.java:748)

 

 

I get this error when ever I try and start it.

 

This error usually happens when DeedPlanner is unable to load its needed data, did you moved the executable somewhere out of the folder or run program in location where it can't access files?

Share this post


Link to post
Share on other sites

~/Downloads/DeedPlanner 2.8.10

 

Within that folder are 2 folders, 'Data' and 'lib', and the DeedPlanner.jar

Share this post


Link to post
Share on other sites

Hi

 

Is there any way of joining some maps (multivillage map) without doint it manually? I suppose I can change the map height and width to accomodate the final size and modify the x and y positions of the extra maps, but it should be great to have some way of avoiding the hand work (and probably messes)

Share this post


Link to post
Share on other sites
1 hour ago, Jonathon said:

Hi

 

Is there any way of joining some maps (multivillage map) without doint it manually? I suppose I can change the map height and width to accomodate the final size and modify the x and y positions of the extra maps, but it should be great to have some way of avoiding the hand work (and probably messes)

 

This little tool was made for tasks like that :) :

It still has some drawbacks, and I cannot really support it at the moment, but it should do what you need.

  • Like 1

Share this post


Link to post
Share on other sites

I made a 3 tile wide flat slate bridge in the planner and it isnt all slate?

 

https://prnt.sc/ih04rs

 

I assume this isn't intended? Perhaps i'm planning incorrectly? 

Share this post


Link to post
Share on other sites
On 18/2/2018 at 8:25 PM, Yaga said:

 

This little tool was made for tasks like that :) :

It still has some drawbacks, and I cannot really support it at the moment, but it should do what you need.

I can open exported maps, but I can't open DP saved maps.

 

If i delete the exporter="DeedPlanner 2.8.10" on the map file, I can open it again

Edited by Jonathon

Share this post


Link to post
Share on other sites
21 hours ago, Xor said:

I made a 3 tile wide flat slate bridge in the planner and it isnt all slate?

I assume this isn't intended? Perhaps i'm planning incorrectly? 

 

I got similar weirdness with pottery brick bridges, so probably not you. :)

  • Like 1

Share this post


Link to post
Share on other sites
On 19.02.2018 at 8:38 PM, Xor said:

I made a 3 tile wide flat slate bridge in the planner and it isnt all slate?

 

https://prnt.sc/ih04rs

 

I assume this isn't intended? Perhaps i'm planning incorrectly? 

 

Texture is not overwritten correctly, bug in a program. Will be fixed in next update, existing bridges should be automatically updated.

  • Like 1

Share this post


Link to post
Share on other sites
13 hours ago, Jonathon said:

I can open exported maps, but I can't open DP saved maps.

 

If i delete the exporter="DeedPlanner 2.8.10" on the map file, I can open it again

 

Apparently, DeedPlanner's file structure was changed since the last version of DPMapAssist was released. I will look into this when I can. Thanks for the heads-up.

Share this post


Link to post
Share on other sites
1 hour ago, Yaga said:

 

Apparently, DeedPlanner's file structure was changed since the last version of DPMapAssist was released. I will look into this when I can. Thanks for the heads-up.

 

If this helps, DeedPlanner maps DOM model is always backward compatible and it will remain this way unless I will need to make a radical changes.

 

There are few failures in it I might change sooner or later, but they doesn't slow down the development yet so they will stay (for example, object positions being stored as constants instead of coordinates)

Share this post


Link to post
Share on other sites

Is there a way to rotate the staircases when placing them in the planner?

Share this post


Link to post
Share on other sites
26 minutes ago, Xor said:

Is there a way to rotate the staircases when placing them in the planner?

 

Yes, the same way as you can rotate floors, by changing floor orientation.

  • Like 1

Share this post


Link to post
Share on other sites

Status update - 2.9 is still WIP, I want to focus on more interface improvements and graphical changes that will make it much easier to add some often requested features (like making screenshot of the entire map in desired scale). Edit mode for isometric view will likely appear later due to engine lacking several important features that would make isometric editing "feel right" (mostly raytracing - thing that allows you to select any 3d object/creature in Wurm world, DeedPlanner currently uses much simpler technique that only really works good for 2d), but view mode for it is already done and will appear in 2.9 as experimental feature.

 

When it comes to analytics, user count is very stable since 2 months at these numbers:

400 users per month

160 users per week

55 users per day

 

One statistic surprised me more than others - I always thought DeedPlanner is used occasionally mostly when someone needs to plan a new deed (that's my personal use case). It turns out that over half of the users use it regularly (at least once per two weeks).

 

I decided to publish donation stats for transparency and added extra section in OP about them.

 

If you made a donation and would like to see yourself listened here (by default only "donations per year" gets updated), please send me a private message. This applies to both old and new donations as long as I can verify them (up to exactly 3 years in a past).

Donations per year (since March 2015):

2018 - 0

2017 - 71€

2016 - 30€

2015 - 25€

  • Like 3

Share this post


Link to post
Share on other sites

Thank you for all the hard work Warlander. DeedPlanner is such an amazing and fun tool! That change log is pretty mind blowing as well! Countless hours of improving this tool and making our Wurmian lives better! <3

  • Like 2

Share this post


Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
Sign in to follow this