Posted January 18, 2018 34 minutes ago, Warlander said: Small status update, I got my (engineering) thesis printed and framed today, so DeedPlanner and Wurm development will return back to normal soon... Trust me, I'm (almost) an engineer! If all goes well, I should have large update ready before the end of February. Congrats Warlander!! Share this post Link to post Share on other sites
Posted January 21, 2018 On 1/18/2018 at 1:30 AM, Warlander said: Small status update, I got my (engineering) thesis printed and framed today, so DeedPlanner and Wurm development will return back to normal soon... Trust me, I'm (almost) an engineer! If all goes well, I should have large update ready before the end of February. Yayyyyyyyyyyyy!!!!!!!!!!!! Well done! Share this post Link to post Share on other sites
Posted January 22, 2018 On 1/17/2018 at 11:30 PM, Warlander said: Small status update, I got my (engineering) thesis printed and framed today, so DeedPlanner and Wurm development will return back to normal soon... Trust me, I'm (almost) an engineer! If all goes well, I should have large update ready before the end of February. Congratulations. Share this post Link to post Share on other sites
Posted January 27, 2018 (edited) Thanks for this amazing tool! A couple random bugs I have spotted and would like to report: - The "crate rack" and "rack for empty bsb" objects seems to be missing - Can't place high iron fence on arch wall sections (they should not replace the wall) - I get a Java error when adding a freedom wagon object (java.io.FileNotFoundException: Data\Objects (Access is denied)) Edited January 27, 2018 by Hodor 1 Share this post Link to post Share on other sites
Posted January 27, 2018 4 hours ago, Hodor said: Thanks for this amazing tool! A couple random bugs I have spotted and would like to report: - The "crate rack" and "rack for empty bsb" objects seems to be missing - Can't place high iron fence on arch wall sections (they should not replace the wall) - I get a Java error when adding a freedom wagon object (java.io.FileNotFoundException: Data\Objects (Access is denied)) I get the error as well with freedom wagon placement. Ignoring the error seems fine, as the object does get placed and deedplanner continues to function fine. Share this post Link to post Share on other sites
Posted January 30, 2018 Is there any chance to put separate label for each level? Couse if I name for example room on the first floor (BLACKSMITH), then all other levels got the same label. Or maybe I'am doing something wrong? Thanks 1 Share this post Link to post Share on other sites
Posted January 30, 2018 1 hour ago, Wilczan said: Is there any chance to put separate label for each level? Couse if I name for example room on the first floor (BLACKSMITH), then all other levels got the same label. Or maybe I'am doing something wrong? Thanks Sounds like a good idea, I will take a look at it. 1 Share this post Link to post Share on other sites
Posted February 4, 2018 I can not seem to run deed planner. I get this error message [2018-02-04 09:48:56] Error has occurred! Java vendor: Oracle Corporation Java version: 1.8.0_161 DeedPlanner 2.8.8 java.lang.NullPointerException at pl.wurmonline.deedplanner.input.Keybindings.prepareKeybindings(Keybindings.java:149) at pl.wurmonline.deedplanner.input.Keybindings.<init>(Keybindings.java:58) at pl.wurmonline.deedplanner.logic.LogicLoop.<init>(LogicLoop.java:38) at pl.wurmonline.deedplanner.MainLoop.<init>(MainLoop.java:17) at pl.wurmonline.deedplanner.MapPanel.<init>(MapPanel.java:34) at pl.wurmonline.deedplanner.MapPanel.<init>(MapPanel.java:22) at pl.wurmonline.deedplanner.forms.Planner.initComponents(Planner.java:174) at pl.wurmonline.deedplanner.forms.Planner.<init>(Planner.java:34) at pl.wurmonline.deedplanner.forms.Loading.lambda$new$32(Loading.java:38) at java.lang.Thread.run(Unknown Source) HELP Please Share this post Link to post Share on other sites
Posted February 5, 2018 2.9 will bring major interface changes, small teaser below (still subject to change): It's possible to put the toolkit on a left side of a screen if someone is used to that. 4 Share this post Link to post Share on other sites
Posted February 10, 2018 (edited) [2018-02-10 11:49:39] Error has occurred! Java vendor: Oracle Corporation Java version: 1.8.0_161 DeedPlanner 2.8.10 java.lang.NullPointerException at java.util.Arrays.stream(Arrays.java:5004) at pl.wurmonline.deedplanner.forms.Loading.lambda$new$32(Loading.java:35) at java.lang.Thread.run(Thread.java:748) I get this error when ever I try and start it. Edited February 10, 2018 by Korhaka Share this post Link to post Share on other sites
Posted February 10, 2018 1 hour ago, Korhaka said: [2018-02-10 11:49:39] Error has occurred! Java vendor: Oracle Corporation Java version: 1.8.0_161 DeedPlanner 2.8.10 java.lang.NullPointerException at java.util.Arrays.stream(Arrays.java:5004) at pl.wurmonline.deedplanner.forms.Loading.lambda$new$32(Loading.java:35) at java.lang.Thread.run(Thread.java:748) I get this error when ever I try and start it. This error usually happens when DeedPlanner is unable to load its needed data, did you moved the executable somewhere out of the folder or run program in location where it can't access files? Share this post Link to post Share on other sites
Posted February 14, 2018 ~/Downloads/DeedPlanner 2.8.10 Within that folder are 2 folders, 'Data' and 'lib', and the DeedPlanner.jar Share this post Link to post Share on other sites
Posted February 18, 2018 Hi Is there any way of joining some maps (multivillage map) without doint it manually? I suppose I can change the map height and width to accomodate the final size and modify the x and y positions of the extra maps, but it should be great to have some way of avoiding the hand work (and probably messes) Share this post Link to post Share on other sites
Posted February 18, 2018 1 hour ago, Jonathon said: Hi Is there any way of joining some maps (multivillage map) without doint it manually? I suppose I can change the map height and width to accomodate the final size and modify the x and y positions of the extra maps, but it should be great to have some way of avoiding the hand work (and probably messes) This little tool was made for tasks like that : It still has some drawbacks, and I cannot really support it at the moment, but it should do what you need. 1 Share this post Link to post Share on other sites
Posted February 19, 2018 I made a 3 tile wide flat slate bridge in the planner and it isnt all slate? https://prnt.sc/ih04rs I assume this isn't intended? Perhaps i'm planning incorrectly? Share this post Link to post Share on other sites
Posted February 20, 2018 (edited) On 18/2/2018 at 8:25 PM, Yaga said: This little tool was made for tasks like that : It still has some drawbacks, and I cannot really support it at the moment, but it should do what you need. I can open exported maps, but I can't open DP saved maps. If i delete the exporter="DeedPlanner 2.8.10" on the map file, I can open it again Edited February 20, 2018 by Jonathon Share this post Link to post Share on other sites
Posted February 20, 2018 21 hours ago, Xor said: I made a 3 tile wide flat slate bridge in the planner and it isnt all slate? I assume this isn't intended? Perhaps i'm planning incorrectly? I got similar weirdness with pottery brick bridges, so probably not you. 1 Share this post Link to post Share on other sites
Posted February 20, 2018 On 19.02.2018 at 8:38 PM, Xor said: I made a 3 tile wide flat slate bridge in the planner and it isnt all slate? https://prnt.sc/ih04rs I assume this isn't intended? Perhaps i'm planning incorrectly? Texture is not overwritten correctly, bug in a program. Will be fixed in next update, existing bridges should be automatically updated. 1 Share this post Link to post Share on other sites
Posted February 20, 2018 13 hours ago, Jonathon said: I can open exported maps, but I can't open DP saved maps. If i delete the exporter="DeedPlanner 2.8.10" on the map file, I can open it again Apparently, DeedPlanner's file structure was changed since the last version of DPMapAssist was released. I will look into this when I can. Thanks for the heads-up. Share this post Link to post Share on other sites
Posted February 20, 2018 1 hour ago, Yaga said: Apparently, DeedPlanner's file structure was changed since the last version of DPMapAssist was released. I will look into this when I can. Thanks for the heads-up. If this helps, DeedPlanner maps DOM model is always backward compatible and it will remain this way unless I will need to make a radical changes. There are few failures in it I might change sooner or later, but they doesn't slow down the development yet so they will stay (for example, object positions being stored as constants instead of coordinates) Share this post Link to post Share on other sites
Posted February 22, 2018 Is there a way to rotate the staircases when placing them in the planner? Share this post Link to post Share on other sites
Posted February 22, 2018 26 minutes ago, Xor said: Is there a way to rotate the staircases when placing them in the planner? Yes, the same way as you can rotate floors, by changing floor orientation. 1 Share this post Link to post Share on other sites
Posted March 7, 2018 Status update - 2.9 is still WIP, I want to focus on more interface improvements and graphical changes that will make it much easier to add some often requested features (like making screenshot of the entire map in desired scale). Edit mode for isometric view will likely appear later due to engine lacking several important features that would make isometric editing "feel right" (mostly raytracing - thing that allows you to select any 3d object/creature in Wurm world, DeedPlanner currently uses much simpler technique that only really works good for 2d), but view mode for it is already done and will appear in 2.9 as experimental feature. When it comes to analytics, user count is very stable since 2 months at these numbers: 400 users per month 160 users per week 55 users per day One statistic surprised me more than others - I always thought DeedPlanner is used occasionally mostly when someone needs to plan a new deed (that's my personal use case). It turns out that over half of the users use it regularly (at least once per two weeks). I decided to publish donation stats for transparency and added extra section in OP about them. If you made a donation and would like to see yourself listened here (by default only "donations per year" gets updated), please send me a private message. This applies to both old and new donations as long as I can verify them (up to exactly 3 years in a past). Donations per year (since March 2015): 2018 - 0€ 2017 - 71€ 2016 - 30€ 2015 - 25€ 3 Share this post Link to post Share on other sites
Posted March 7, 2018 Thank you for all the hard work Warlander. DeedPlanner is such an amazing and fun tool! That change log is pretty mind blowing as well! Countless hours of improving this tool and making our Wurmian lives better! <3 2 Share this post Link to post Share on other sites