Deedplanner 2.9.10 - 3D House And Deed Planner

[Wilczan 2,048]

After exporting village plan to deedplanner:

- slate slab floors and brick floors are replaced by wooden plank floors

- slate slab left/right staircases are replaced with wooden plank floors

- clockwise and counterclockwise staircases are replaced with wooden plank floors

- wide staircases are replaced with wooden plank floors

- standalone staircase is oriented south instead of west

- mine entrance with silver mine door is replaced by grass

- mine entrance without minedoor is replaced by wooden mine door

- bridges are gone

- hota statues, magic turrets, bell tower are gone

 

Suggestions:

- there could be whole perimeter visible

- add lamps and tall kingdom banners

- building 2 tile wide or more bridges always generate some bad elements despite of right choice on the bridge creation menu

[Booskii 379]

Question!!!

 

Hi! So Have my deed plan here but when i view it 2d vs 3d when i look at this bin it has me short a few tiles to the top it cuts off at the 2x2 tundra but when i link it it shows fine for others. I have deleted and reinstall any ideas?

 

http://pastebin.com/eEKxgBKj

 

[Warlander 2,730]

6 hours ago, Booskii said:

Question!!!

 

Hi! So Have my deed plan here but when i view it 2d vs 3d when i look at this bin it has me short a few tiles to the top it cuts off at the 2x2 tundra but when i link it it shows fine for others. I have deleted and reinstall any ideas?

 

http://pastebin.com/eEKxgBKj

 

 

I am not really sure what you mean, can you explain more please? It loads properly for me.

[Wilczan 2,048]

Missing textures for HOTA Dragon statue.

 

Any chance to rotate minedoors?

 

Change of global height removing all bridges.

Edited March 14, 2016 by Wilczan

[Wilczan 2,048]

Hello, one big annoying thing.

 

My deed plan, wich I made, in file got around 4 MB.

 

When I start playing with bridges it growth to 12 MB.

 

But noticed that after few more changes it growth to 40MB.

 

Today opened a plan and file has 80MB size!!

 

Only latest change I made was adding few two-story houses.

 

Is there any error that multiplies each time I open it? It's very annoying couse now, opening the file takes very long.

[Booskii 379]

On Monday, March 14, 2016 at 6:13 AM, Warlander said:

 

I am not really sure what you mean, can you explain more please? It loads properly for me.

I loose about 6 tiles in. Hight and the full with across the top. I know it sounds strange if you look at the top I have a short row of iron fences that's the last visable boarder for me in 2d I can see the "missing ones " in 3d though. Asked a friend Also who can see them find so I get its me I tried adding 10 tiles on all sides and yet only 3 sides expand eve maximised and drug out fill size of my screen there still mia.

[Wilczan 2,048]

Checked the file and removed all bridge data, now file has 418kb, so there were almost 80MB bridge data. Got around 27 bridges on plan.

[Madt 1,178]

I tried to open the app but it crashed immediately and gave me this error log:

 

Spoiler

[2016-03-27 09:31:17] Error has occurred!
Java vendor: Oracle Corporation
Java version: 1.8.0_77
java.lang.NoClassDefFoundError: javax/media/opengl/awt/GLJPanel
    at java.lang.ClassLoader.defineClass1(Native Method)
    at java.lang.ClassLoader.defineClass(Unknown Source)
    at java.security.SecureClassLoader.defineClass(Unknown Source)
    at java.net.URLClassLoader.defineClass(Unknown Source)
    at java.net.URLClassLoader.access$100(Unknown Source)
    at java.net.URLClassLoader$1.run(Unknown Source)
    at java.net.URLClassLoader$1.run(Unknown Source)
    at java.security.AccessController.doPrivileged(Native Method)
    at java.net.URLClassLoader.findClass(Unknown Source)
    at java.lang.ClassLoader.loadClass(Unknown Source)
    at sun.misc.Launcher$AppClassLoader.loadClass(Unknown Source)
    at java.lang.ClassLoader.loadClass(Unknown Source)
    at pl.wurmonline.deedplanner.forms.Loading.lambda$new$26(Loading.java:29)
    at java.lang.Thread.run(Unknown Source)
Caused by: java.lang.ClassNotFoundException: javax.media.opengl.awt.GLJPanel
    at java.net.URLClassLoader.findClass(Unknown Source)
    at java.lang.ClassLoader.loadClass(Unknown Source)
    at sun.misc.Launcher$AppClassLoader.loadClass(Unknown Source)
    at java.lang.ClassLoader.loadClass(Unknown Source)
    ... 14 more

 

[Warlander 2,730]

5 minutes ago, Madt said:

I tried to open the app but it crashed immediately and gave me this error log:

 

  Hide contents

[2016-03-27 09:31:17] Error has occurred!
Java vendor: Oracle Corporation
Java version: 1.8.0_77
java.lang.NoClassDefFoundError: javax/media/opengl/awt/GLJPanel
    at java.lang.ClassLoader.defineClass1(Native Method)
    at java.lang.ClassLoader.defineClass(Unknown Source)
    at java.security.SecureClassLoader.defineClass(Unknown Source)
    at java.net.URLClassLoader.defineClass(Unknown Source)
    at java.net.URLClassLoader.access$100(Unknown Source)
    at java.net.URLClassLoader$1.run(Unknown Source)
    at java.net.URLClassLoader$1.run(Unknown Source)
    at java.security.AccessController.doPrivileged(Native Method)
    at java.net.URLClassLoader.findClass(Unknown Source)
    at java.lang.ClassLoader.loadClass(Unknown Source)
    at sun.misc.Launcher$AppClassLoader.loadClass(Unknown Source)
    at java.lang.ClassLoader.loadClass(Unknown Source)
    at pl.wurmonline.deedplanner.forms.Loading.lambda$new$26(Loading.java:29)
    at java.lang.Thread.run(Unknown Source)
Caused by: java.lang.ClassNotFoundException: javax.media.opengl.awt.GLJPanel
    at java.net.URLClassLoader.findClass(Unknown Source)
    at java.lang.ClassLoader.loadClass(Unknown Source)
    at sun.misc.Launcher$AppClassLoader.loadClass(Unknown Source)
    at java.lang.ClassLoader.loadClass(Unknown Source)
    ... 14 more

 

 

Common error if you try to run program without unzipping it or moved .jar file outside of original location without moving all other files as well.

[Madt 1,178]

10 minutes ago, Warlander said:

 

Common error if you try to run program without unzipping it or moved .jar file outside of original location without moving all other files as well.

 

... doh. My bad.

Thanks lol.

[Araninke 490]

So, can anyone confirm that bridges in deedplanner don't quite match up to what's seen in game? Trying to reproduce a bridge design from a screenshot and it is just not arcing high enough like my example. Also, when you create a bridge what are all the segments about? You can only hover the top row and you can highlight individual ones in the bottom row but it doesn't seem to do anything. Are we suppose to be able to select other pieces because if so it's not intuitive how to do so. Same with the "other data" numbers or whatever they are called at the bottom - I can't figure out what they actually accomplish.

 

On top of all that, bridge parts don't get deleted when you undo them and also can't find a way to delete them. :/

[Kegan 3,926]

I have not used this in awhile but when i downloaded the newest version and loaded my old map up i get this error..

Spoiler

[2016-03-31 12:25:04] Error has occurred!
Java vendor: Oracle Corporation
Java version: 1.8.0_77
java.nio.file.NoSuchFileException: Data\Walls\LavenderHedge.wom
    at sun.nio.fs.WindowsException.translateToIOException(Unknown Source)
    at sun.nio.fs.WindowsException.rethrowAsIOException(Unknown Source)
    at sun.nio.fs.WindowsException.rethrowAsIOException(Unknown Source)
    at sun.nio.fs.WindowsFileSystemProvider.newByteChannel(Unknown Source)
    at java.nio.file.Files.newByteChannel(Unknown Source)
    at java.nio.file.Files.newByteChannel(Unknown Source)
    at java.nio.file.Files.readAllBytes(Unknown Source)
    at pl.wurmonline.deedplanner.util.jogl.Model.loadMeshes(Model.java:104)
    at pl.wurmonline.deedplanner.util.jogl.Model.render(Model.java:91)
    at pl.wurmonline.deedplanner.data.Wall.render(Wall.java:50)
    at pl.wurmonline.deedplanner.data.Tile.renderEntities(Tile.java:233)
    at pl.wurmonline.deedplanner.data.Tile.renderWorld(Tile.java:167)
    at pl.wurmonline.deedplanner.data.Tile.render3d(Tile.java:151)
    at pl.wurmonline.deedplanner.data.Map.render(Map.java:428)
    at pl.wurmonline.deedplanner.graphics.GraphicsLoop.display(GraphicsLoop.java:58)
    at jogamp.opengl.GLDrawableHelper.displayImpl(GLDrawableHelper.java:665)
    at jogamp.opengl.GLDrawableHelper.display(GLDrawableHelper.java:649)
    at javax.media.opengl.awt.GLJPanel$Updater.display(GLJPanel.java:1213)
    at javax.media.opengl.awt.GLJPanel$8.run(GLJPanel.java:1269)
    at jogamp.opengl.GLDrawableHelper.invokeGLImpl(GLDrawableHelper.java:1119)
    at jogamp.opengl.GLDrawableHelper.invokeGL(GLDrawableHelper.java:994)
    at javax.media.opengl.awt.GLJPanel$OffscreenBackend.doPaintComponent(GLJPanel.java:1777)
    at javax.media.opengl.awt.GLJPanel.paintComponent(GLJPanel.java:545)
    at javax.swing.JComponent.paint(Unknown Source)
    at javax.swing.JComponent.paintToOffscreen(Unknown Source)
    at javax.swing.RepaintManager$PaintManager.paintDoubleBuffered(Unknown Source)
    at javax.swing.RepaintManager$PaintManager.paint(Unknown Source)
    at javax.swing.RepaintManager.paint(Unknown Source)
    at javax.swing.JComponent._paintImmediately(Unknown Source)
    at javax.swing.JComponent.paintImmediately(Unknown Source)
    at javax.swing.RepaintManager$4.run(Unknown Source)
    at javax.swing.RepaintManager$4.run(Unknown Source)
    at java.security.AccessController.doPrivileged(Native Method)
    at java.security.ProtectionDomain$JavaSecurityAccessImpl.doIntersectionPrivilege(Unknown Source)
    at javax.swing.RepaintManager.paintDirtyRegions(Unknown Source)
    at javax.swing.RepaintManager.paintDirtyRegions(Unknown Source)
    at com.jogamp.opengl.util.AWTAnimatorImpl$1.run(AWTAnimatorImpl.java:162)
    at java.awt.event.InvocationEvent.dispatch(Unknown Source)
    at java.awt.EventQueue.dispatchEventImpl(Unknown Source)
    at java.awt.EventQueue.access$500(Unknown Source)
    at java.awt.EventQueue$3.run(Unknown Source)
    at java.awt.EventQueue$3.run(Unknown Source)
    at java.security.AccessController.doPrivileged(Native Method)
    at java.security.ProtectionDomain$JavaSecurityAccessImpl.doIntersectionPrivilege(Unknown Source)
    at java.awt.EventQueue.dispatchEvent(Unknown Source)
    at java.awt.EventDispatchThread.pumpOneEventForFilters(Unknown Source)
    at java.awt.EventDispatchThread.pumpEventsForFilter(Unknown Source)
    at java.awt.EventDispatchThread.pumpEventsForHierarchy(Unknown Source)
    at java.awt.EventDispatchThread.pumpEvents(Unknown Source)
    at java.awt.EventDispatchThread.pumpEvents(Unknown Source)
    at java.awt.EventDispatchThread.run(Unknown Source)

 

 

[Warlander 2,730]

47 minutes ago, Kegan said:

I have not used this in awhile but when i downloaded the newest version and loaded my old map up i get this error..

  Hide contents

 

[2016-03-31 12:25:04] Error has occurred!
Java vendor: Oracle Corporation
Java version: 1.8.0_77
java.nio.file.NoSuchFileException: Data\Walls\LavenderHedge.wom
    at sun.nio.fs.WindowsException.translateToIOException(Unknown Source)
    at sun.nio.fs.WindowsException.rethrowAsIOException(Unknown Source)
    at sun.nio.fs.WindowsException.rethrowAsIOException(Unknown Source)
    at sun.nio.fs.WindowsFileSystemProvider.newByteChannel(Unknown Source)
    at java.nio.file.Files.newByteChannel(Unknown Source)
    at java.nio.file.Files.newByteChannel(Unknown Source)
    at java.nio.file.Files.readAllBytes(Unknown Source)
    at pl.wurmonline.deedplanner.util.jogl.Model.loadMeshes(Model.java:104)
    at pl.wurmonline.deedplanner.util.jogl.Model.render(Model.java:91)
    at pl.wurmonline.deedplanner.data.Wall.render(Wall.java:50)
    at pl.wurmonline.deedplanner.data.Tile.renderEntities(Tile.java:233)
    at pl.wurmonline.deedplanner.data.Tile.renderWorld(Tile.java:167)
    at pl.wurmonline.deedplanner.data.Tile.render3d(Tile.java:151)
    at pl.wurmonline.deedplanner.data.Map.render(Map.java:428)
    at pl.wurmonline.deedplanner.graphics.GraphicsLoop.display(GraphicsLoop.java:58)
    at jogamp.opengl.GLDrawableHelper.displayImpl(GLDrawableHelper.java:665)
    at jogamp.opengl.GLDrawableHelper.display(GLDrawableHelper.java:649)
    at javax.media.opengl.awt.GLJPanel$Updater.display(GLJPanel.java:1213)
    at javax.media.opengl.awt.GLJPanel$8.run(GLJPanel.java:1269)
    at jogamp.opengl.GLDrawableHelper.invokeGLImpl(GLDrawableHelper.java:1119)
    at jogamp.opengl.GLDrawableHelper.invokeGL(GLDrawableHelper.java:994)
    at javax.media.opengl.awt.GLJPanel$OffscreenBackend.doPaintComponent(GLJPanel.java:1777)
    at javax.media.opengl.awt.GLJPanel.paintComponent(GLJPanel.java:545)
    at javax.swing.JComponent.paint(Unknown Source)
    at javax.swing.JComponent.paintToOffscreen(Unknown Source)
    at javax.swing.RepaintManager$PaintManager.paintDoubleBuffered(Unknown Source)
    at javax.swing.RepaintManager$PaintManager.paint(Unknown Source)
    at javax.swing.RepaintManager.paint(Unknown Source)
    at javax.swing.JComponent._paintImmediately(Unknown Source)
    at javax.swing.JComponent.paintImmediately(Unknown Source)
    at javax.swing.RepaintManager$4.run(Unknown Source)
    at javax.swing.RepaintManager$4.run(Unknown Source)
    at java.security.AccessController.doPrivileged(Native Method)
    at java.security.ProtectionDomain$JavaSecurityAccessImpl.doIntersectionPrivilege(Unknown Source)
    at javax.swing.RepaintManager.paintDirtyRegions(Unknown Source)
    at javax.swing.RepaintManager.paintDirtyRegions(Unknown Source)
    at com.jogamp.opengl.util.AWTAnimatorImpl$1.run(AWTAnimatorImpl.java:162)
    at java.awt.event.InvocationEvent.dispatch(Unknown Source)
    at java.awt.EventQueue.dispatchEventImpl(Unknown Source)
    at java.awt.EventQueue.access$500(Unknown Source)
    at java.awt.EventQueue$3.run(Unknown Source)
    at java.awt.EventQueue$3.run(Unknown Source)
    at java.security.AccessController.doPrivileged(Native Method)
    at java.security.ProtectionDomain$JavaSecurityAccessImpl.doIntersectionPrivilege(Unknown Source)
    at java.awt.EventQueue.dispatchEvent(Unknown Source)
    at java.awt.EventDispatchThread.pumpOneEventForFilters(Unknown Source)
    at java.awt.EventDispatchThread.pumpEventsForFilter(Unknown Source)
    at java.awt.EventDispatchThread.pumpEventsForHierarchy(Unknown Source)
    at java.awt.EventDispatchThread.pumpEvents(Unknown Source)
    at java.awt.EventDispatchThread.pumpEvents(Unknown Source)
    at java.awt.EventDispatchThread.run(Unknown Source)

 

 

 

Fixed, I will release small update + bugfix tomorrow.

[Warlander 2,730]

Just a friendly notice - DeedPlanner 2.6.0 will drop OpenGL 2.1 support completely and switch to OpenGL 3.3 - this is required step for many incoming optimizations and visual improvements impossible in older versions.

 

For "average user" this means that you will need +/- 6 years old computer (and preferably not an Intel integrated GPU) to be able to run the program.

[Warlander 2,730]

DeedPlanner 2.5.4 released! Changes:

• Made DeedPlanner configuration directory hidden on Linux by default (existing configs shouldn't be affected, but you can manually make file hidden to apply this change)
• Fixed hedges bugs.

[Xandoria 1]

Could you please add the oleander bushes to the next version of Deedplanner?

Many thanks for this great software!

[Aum 771]

have some requests!,nothing super crazy important or anything, I've photo shopped an image to show what i mean x)

1, add a quick pallet , customizable via shift+alt clicking or something

2, include a selected area paint mode, much like the "level area" command on the height tab, where you drag a bounding box to define the area

3. let the tile list resize extend further down based on window size, mine is 1920x1080 and there's a lot of room that could otherwise improve qol

 

that is all for now TY

 

[\spoiler]

[Kegan 3,926]

When you place a banner it throws an error and only shows as a white banner also when/if you look into this it would be nice to have the tall ones added in too.  (the other guard towers would be nice addition too)

[Erlindur 63]

I love this program. Thank you for devoting your time on it. I have an non critical suggestion though, that I don't know if it came up again (74 pages is a lot to read).

 

Right now the export function, saves the deed and 1 tile around it. I think it would be great if it exported the deed plus its active perimeter. It would be great for planning our future expansions.

[Warlander 2,730]

13 hours ago, Erlindur said:

I love this program. Thank you for devoting your time on it. I have an non critical suggestion though, that I don't know if it came up again (74 pages is a lot to read).

 

Right now the export function, saves the deed and 1 tile around it. I think it would be great if it exported the deed plus its active perimeter. It would be great for planning our future expansions.

 

Only deed tiles are exported, because only these are in fact owned by you - possibility to export deed to external programs mostly exists to be able to show others your deed.

 

DeedPlanner 2.5.5 released! Changes:

• Added tall banners, kingdom guard towers and oleanders
• Fixed few GUI resizing issues
• Fixed corrupted textures using non-existent texture index instead of unbinding
• Fixed flags and banners

[Kegan 3,926]

The new version has issues some of the walls on my plan are not showing up right like plain stone double doors and barred walls. Also the wood bridge some if it looks strange too. On the walls it is like the outer skin is missing from it and you can see inside of the wall from the outside. 

 

Edit: It seems like if i do new walls on a new map it is fine but the saved map is bugged. Also the bridge interface is not working it is not showing the highlight then you click on a tile.  (I will check out more stuff later but the new version has some issued for sure) 

 

JK tall banner issue with a bug report.. (Dragon HoTA too) 

Spoiler

 

[2016-04-24 21:29:33] Error has occurred!
Java vendor: Oracle Corporation
Java version: 1.8.0_91
java.io.FileNotFoundException: Data\Objects\gold_eagle_256.png (The system cannot find the file specified)
    at java.io.FileInputStream.open0(Native Method)
    at java.io.FileInputStream.open(Unknown Source)
    at java.io.FileInputStream.<init>(Unknown Source)
    at com.jogamp.opengl.util.texture.TextureIO$StreamBasedTextureProvider.newTextureData(TextureIO.java:1060)
    at com.jogamp.opengl.util.texture.TextureIO.newTextureDataImpl(TextureIO.java:849)
    at com.jogamp.opengl.util.texture.TextureIO.newTextureData(TextureIO.java:218)
    at com.jogamp.opengl.util.texture.TextureIO.newTexture(TextureIO.java:476)
    at pl.wurmonline.deedplanner.graphics.texture.SimpleTex.init(SimpleTex.java:109)
    at pl.wurmonline.deedplanner.graphics.texture.SimpleTex.bind(SimpleTex.java:84)
    at pl.wurmonline.deedplanner.graphics.texture.SimpleTex.bind(SimpleTex.java:65)
    at pl.wurmonline.deedplanner.graphics.wom.Mesh.render(Mesh.java:25)
    at pl.wurmonline.deedplanner.graphics.wom.Model.render(Model.java:91)
    at pl.wurmonline.deedplanner.data.GameObject.render(GameObject.java:25)
    at pl.wurmonline.deedplanner.data.Tile.renderEntities(Tile.java:259)
    at pl.wurmonline.deedplanner.data.Tile.renderWorld(Tile.java:167)
    at pl.wurmonline.deedplanner.data.Tile.render3d(Tile.java:151)
    at pl.wurmonline.deedplanner.data.Map.render(Map.java:428)
    at pl.wurmonline.deedplanner.graphics.GraphicsLoop.display(GraphicsLoop.java:58)
    at jogamp.opengl.GLDrawableHelper.displayImpl(GLDrawableHelper.java:665)
    at jogamp.opengl.GLDrawableHelper.display(GLDrawableHelper.java:649)
    at javax.media.opengl.awt.GLJPanel$Updater.display(GLJPanel.java:1213)
    at javax.media.opengl.awt.GLJPanel$8.run(GLJPanel.java:1269)
    at jogamp.opengl.GLDrawableHelper.invokeGLImpl(GLDrawableHelper.java:1119)
    at jogamp.opengl.GLDrawableHelper.invokeGL(GLDrawableHelper.java:994)
    at javax.media.opengl.awt.GLJPanel$OffscreenBackend.doPaintComponent(GLJPanel.java:1777)
    at javax.media.opengl.awt.GLJPanel.paintComponent(GLJPanel.java:545)
    at javax.swing.JComponent.paint(Unknown Source)
    at javax.swing.JComponent.paintToOffscreen(Unknown Source)
    at javax.swing.RepaintManager$PaintManager.paintDoubleBuffered(Unknown Source)
    at javax.swing.RepaintManager$PaintManager.paint(Unknown Source)
    at javax.swing.RepaintManager.paint(Unknown Source)
    at javax.swing.JComponent._paintImmediately(Unknown Source)
    at javax.swing.JComponent.paintImmediately(Unknown Source)
    at javax.swing.RepaintManager$4.run(Unknown Source)
    at javax.swing.RepaintManager$4.run(Unknown Source)
    at java.security.AccessController.doPrivileged(Native Method)
    at java.security.ProtectionDomain$JavaSecurityAccessImpl.doIntersectionPrivilege(Unknown Source)
    at javax.swing.RepaintManager.paintDirtyRegions(Unknown Source)
    at javax.swing.RepaintManager.paintDirtyRegions(Unknown Source)
    at com.jogamp.opengl.util.AWTAnimatorImpl$1.run(AWTAnimatorImpl.java:162)
    at java.awt.event.InvocationEvent.dispatch(Unknown Source)
    at java.awt.EventQueue.dispatchEventImpl(Unknown Source)
    at java.awt.EventQueue.access$500(Unknown Source)
    at java.awt.EventQueue$3.run(Unknown Source)
    at java.awt.EventQueue$3.run(Unknown Source)
    at java.security.AccessController.doPrivileged(Native Method)
    at java.security.ProtectionDomain$JavaSecurityAccessImpl.doIntersectionPrivilege(Unknown Source)
    at java.awt.EventQueue.dispatchEvent(Unknown Source)
    at java.awt.EventDispatchThread.pumpOneEventForFilters(Unknown Source)
    at java.awt.EventDispatchThread.pumpEventsForFilter(Unknown Source)
    at java.awt.EventDispatchThread.pumpEventsForHierarchy(Unknown Source)
    at java.awt.EventDispatchThread.pumpEvents(Unknown Source)
    at java.awt.EventDispatchThread.pumpEvents(Unknown Source)
    at java.awt.EventDispatchThread.run(Unknown Source)
 

 

 

 

 

 

 

Edited April 25, 2016 by Kegan

[Araninke 490]

I can confirm Dragon HoTA is still bugged. Showed white in last version, black this time around. Also the wall issue and it also seems to be affecting roofs as well. It's as if the outer layer of the model isn't rendering so we are seeing the inside through on the outside if that makes sense. Roofs are showing inner support beams.

[Kegan 3,926]

I wanted to add to this that when bridges get deleted/changed for height difference and saved when you load the map up again the bridge is back ghosted over where the changes are that you made on the new save.  

 

I also do not see a way to revert back to an older version so i am stuck with this now until it is fixed.   

 

Edit: I am at work today and the bridges coming back is also bugged on the 2.5.4 version because i had not updated my work pc to 2.5.5 yet.

 

I think it might be better just to add a delete bridge thing much like the one for houses does. Using the height change was just a way i had discovered to delete a bridge but other then that i can not see any other way to get rid of a bridge.  Now you can plan a new bridge and it will replace the older one but to just delete a bridge there is no way that i can see to do that. 

 

 

Edited April 27, 2016 by Kegan

[Arelone 10]

I just realised that it is possible to export my deed into Deedplanner from my deed token.  Excited isn't the word to describe my joy at not having to count tiles and do it all myself. So i exported, but I see this blue haze over the top of deed.  From reading it seems that my deed is at the wrong height?  I played with adding height, but no idea what i'm doing really.  Finally got it right.  Deleted all trees so I could see more what I was doing.  Then I started to try and put down new house floors and walls - won't do it.  Not sure if it's because I played with heights in a haphazard fashion, having no idea how to do it really; OR it's because the ground isn't flat (which didn't seem to matter in older versions? or perhaps it's because this is an export?) OR there's a bug...  As there's no instructions that I can find it's difficult to know how to go about fixing the height issue in the first place. Many thanks for any help you can offer to someone who is not familiar with the inner workings of this FABULOUS tool.  

[Kegan 3,926]

To plan a house you need the area to be flat just like in the game.