Posted July 1, 2017 Would you be able to update the Combat Assistant stats thing with the new shield parrying messages? Used to be [15:26:18] X tries to maul you but you raise your shield and parry. Now it is [23:03:23] You raise your shield and parry against X's maul. Share this post Link to post Share on other sites
Posted July 1, 2017 Added Nadroj and boilingfort requests to my todo. As for the server travel on Wurm Unlimited, I'd have to investigate this further. I thought it should work the same as with WO. Not sure when I'll have a bit more time to do this though. Does restarting WA fix the issue? 1 Share this post Link to post Share on other sites
Posted July 2, 2017 No I have Spent the last week asking around our server and restarted wurm and WU assistant more then a dozen times. I have poured over forums and bug post and tried reinstalling and even asked for the ServerwebUrls. All my attempts to find a simple fix have fallen through. But on a side note. Love Wurm Assistant. Used it back when I played Wurm Online, and looking forward to what's to come. Thank you very much for looking into this. Share this post Link to post Share on other sites
Posted July 2, 2017 Every so often when starting up WA, it only loads a few of the features. The rest error, with the following info. Spoiler [15:28:39] > Info > BackupManager > Data backup system has been locked. [15:28:39] > Info > AppMigrationsManager > Wurm Assistant data is at version 2. No upgrade required. [15:28:40] > Error > FeaturesManager > Unable to resolve IFeature named AldursLab.WurmAssistant3.Areas.Timers.TimersFeature > irrKlang device could not be created with the specified parameters. [15:28:40] > Error > FeaturesManager > Unable to resolve IFeature named AldursLab.WurmAssistant3.Areas.Calendar.CalendarFeature > irrKlang device could not be created with the specified parameters. [15:28:40] > Error > FeaturesManager > Unable to resolve IFeature named AldursLab.WurmAssistant3.Areas.Triggers.TriggersFeature > irrKlang device could not be created with the specified parameters. [15:28:40] > Error > FeaturesManager > Unable to resolve IFeature named AldursLab.WurmAssistant3.Areas.SoundManager.SoundManagerFeature > irrKlang device could not be created with the specified parameters. [15:28:40] > Error > FeaturesManager > Unable to resolve IFeature named AldursLab.WurmAssistant3.Areas.Granger.GrangerFeature > irrKlang device could not be created with the specified parameters. [15:28:40] > Info > FeaturesManager > Feature initialized: Log Searcher [15:28:40] > Info > FeaturesManager > Feature initialized: Crafting Assistant [15:28:40] > Info > FeaturesManager > Feature initialized: Reveal Creatures Parser [15:28:40] > Info > FeaturesManager > Feature initialized: Skill Stats [15:28:40] > Info > FeaturesManager > Feature initialized: Combat Assistant [15:28:40] > Info > WaVersion > Parsed WA version: MinorVersion: 3.3, BuildCode: stable-win, BuildNumber: 86, BuildStamp: 27/05/2017 00:57:50 +02:00 Restarting the program and the PC don't seem to make a difference. However, after a few days of this, it randomly starts working. This has happened 4-5 times since January, at a guess. What's the cause of this? What can I do to prevent it? Share this post Link to post Share on other sites
Posted July 2, 2017 I'm not sure exactly, but this error is sound related. I suspect you might have another audio device sometimes plugged into your PC and it somehow conflicts with sound system of WA. Try experimenting with this, I would love some more feedback. In the meantime, I'll try adding a workaround, so that features don't crash due to this, just no sound will work. Share this post Link to post Share on other sites
Posted July 3, 2017 18 hours ago, Aldur said: I'm not sure exactly, but this error is sound related. I suspect you might have another audio device sometimes plugged into your PC and it somehow conflicts with sound system of WA. Try experimenting with this, I would love some more feedback. In the meantime, I'll try adding a workaround, so that features don't crash due to this, just no sound will work. Yeah, I have a headset I have plugged in sometimes, occasionally my son uses his headset, and sometimes nothing is plugged in. I unplugged my headset to use 2 USB slots for some mobile power banks (hello Pokemon Go, and your battery-eating habits) and didn't plug my headset back in. With no audio devices plugged in, I got the error. When I unplugged a power bank, and plugged my headset in, WA starts up properly. With the headset plugged in, and the power bank plugged into a different slot, it starts up properly. With the headset unplugged again, WA starts with the error I reported earlier. So, you're right, it's most definitely related to the sound device being plugged in. This being the cause of the problem is something I would never have thought of, as I play without sound in 95% of my games, and my volume control is only ever used for when I'm on comms. Thank you for the help, Aldur. I'll just leave my headset plugged in. =) 1 Share this post Link to post Share on other sites
Posted July 5, 2017 Where can I find your donation button? I'd like to buy you a beer or two. 1 Share this post Link to post Share on other sites
Posted July 5, 2017 No more donation button, sorry. But you can drink in my name! Share this post Link to post Share on other sites
Posted July 5, 2017 23 minutes ago, Aldur said: No more donation button, sorry. But you can drink in my name! How come? I'd love to donate to the cause, this tool is amazing, it has helped me and my wife enjoy Wurm to the maximum. We want to see it continue. Share this post Link to post Share on other sites
Posted July 5, 2017 Don't worry about it. I am still maintaining the app, it just goes slower because of lots of other work recently... and summer. No need to donate anything. 1 Share this post Link to post Share on other sites
Posted July 5, 2017 Appreciation for you efforts abound no matter what rate it comes at buddy. Some people just wish they could show it with cashmoney apparently 1 Share this post Link to post Share on other sites
Posted July 9, 2017 (edited) Hello friends. I've come across a bug. I'm not sure what to make of it but i would appreciate any help i can get. The WA log as follow : processing creature cancelled, AH skill or server group unknown for player Ownin (skill: ; server: Name: WYVERN REBORN, WebStatsUrl: , ServerGroup: SERVERSCOPED:WYVERN REBORN Im wondering what are the steps i can take to run the client smoothly, it doesnt seem to register any of my characters on any servers. I think its my computer but ive used my laptop with the same result. CANT PROCESS CREATURE Server or AH skill level unknown for "PLAYERNAME." If WA was just started, give it a few seconds. Edited July 9, 2017 by Joemadly Share this post Link to post Share on other sites
Posted July 22, 2017 Is it possible to use Wurm Assistant to track timers in both WO and WU at the same time? How do you change the logfile path for a custom server group? Share this post Link to post Share on other sites
Posted September 13, 2017 (edited) question, later on, will u be adding in cows/sheep/bison/hell horses and what not to the list? I like using Granger lot x3 Edited September 13, 2017 by Luka 1 Share this post Link to post Share on other sites
Posted October 12, 2017 odd since the new update for WU I keep getting this error [17:38:45] > Info > PrayerTimer > could not establish server for this server group, timerID: Prayer, group: Prayer, player: Share this post Link to post Share on other sites
Posted October 18, 2017 I can start both the Online and Unlimited WA only once after installation using the launcher. First launch will download the packs and start fine. If I try to start again I get a file not found error. What can be wrong here? Log below. Spoiler Local version is: MinorVersion: 3.3, BuildCode: stable-win, BuildNumber: 87, BuildStamp: 2017.10.01. 22:49:34 +02:00 Obtaining latest version for build stable-win Latest version for build stable-win is: 87 Target version is already installed. Error at TryRunWurmAssistant: System.ComponentModel.Win32Exception (0x80004005): The system cannot find the file specified at System.Diagnostics.Process.StartWithShellExecuteEx(ProcessStartInfo startInfo) at System.Diagnostics.Process.Start() at System.Diagnostics.Process.Start(ProcessStartInfo startInfo) at AldursLab.WurmAssistant.Launcher.Modules.ProcessRunner.Start(String filePath, String args) in C:\Dev-vcs\Github\WurmAssistant3\src\Launchers\LauncherV2\WurmAssistant.Launcher\Modules\ProcessRunner.cs:line 18 at AldursLab.WurmAssistant.Launcher.Contracts.InstallLocation.RunWurmAssistant(String buildNumber) in C:\Dev-vcs\Github\WurmAssistant3\src\Launchers\LauncherV2\WurmAssistant.Launcher\Contracts\InstallLocation.cs:line 62 at AldursLab.WurmAssistant.Launcher.Root.LaunchController.TryRunWurmAssistant(IInstallLocation installLocation, String targetBuildNumber) in C:\Dev-vcs\Github\WurmAssistant3\src\Launchers\LauncherV2\WurmAssistant.Launcher\Root\LaunchController.cs:line 249Error while attempting to start Wurm Assistant: The system cannot find the file specified Could not start WA for version: MinorVersion: , BuildCode: stable-win, BuildNumber: 87, BuildStamp: 0001.01.01. 0:00:00 +00:00 Error at TryRunWurmAssistant: System.ComponentModel.Win32Exception (0x80004005): The system cannot find the file specified at System.Diagnostics.Process.StartWithShellExecuteEx(ProcessStartInfo startInfo) at System.Diagnostics.Process.Start() at System.Diagnostics.Process.Start(ProcessStartInfo startInfo) at AldursLab.WurmAssistant.Launcher.Modules.ProcessRunner.Start(String filePath, String args) in C:\Dev-vcs\Github\WurmAssistant3\src\Launchers\LauncherV2\WurmAssistant.Launcher\Modules\ProcessRunner.cs:line 18 at AldursLab.WurmAssistant.Launcher.Contracts.InstallLocation.RunWurmAssistant(String buildNumber) in C:\Dev-vcs\Github\WurmAssistant3\src\Launchers\LauncherV2\WurmAssistant.Launcher\Contracts\InstallLocation.cs:line 62 at AldursLab.WurmAssistant.Launcher.Root.LaunchController.TryRunWurmAssistant(IInstallLocation installLocation, String targetBuildNumber) in C:\Dev-vcs\Github\WurmAssistant3\src\Launchers\LauncherV2\WurmAssistant.Launcher\Root\LaunchController.cs:line 249Error while attempting to start Wurm Assistant: The system cannot find the file specified Share this post Link to post Share on other sites
Posted October 18, 2017 Hi Jaz. I suspect antivirus, please try adding launcher folder to exclusions and see if the issue persists. Luka, I'm sorry but I don't know what might be cause of this. I doubt it's the update (nothing changed in timers). Maybe server group is set incorrectly? The log says "group: prayer", that doesn't seem right. Share this post Link to post Share on other sites
Posted October 19, 2017 yeh, it's telling me it can't find my character on the server I play on, it worked before they updated WU now it doesn't like it. Share this post Link to post Share on other sites
Posted October 24, 2017 A fantastic and indispensable tool in my Wurm life. All I could ask would be the ability to choose the color of the timers to make them easier to distinguish at a glance. Share this post Link to post Share on other sites
Posted October 31, 2017 (edited) Been getting quite a few issues lately, not sure if it's something I did or what but here's a few of the errors when trying to update horses for example (only edited character name to "Charname") edit: May have been a rogue wurm assistant process running in the background that may have caused the issues.. Seems ok again for now. Spoiler > Info > GrangerFeature > processing creature cancelled, AH skill or server group unknown for player Charname (skill: ; server: > Error > WurmApi > ScanJobExecutor: Error during scan job execution, search params: CharacterName: CHARNAME, LogType: Skills, DateFrom: 2017-08-02 08:27:42, DateTo: 2017-10-31 08:27:42, PmCharacterName: > Data error (cyclic redundancy check). > Error > GrangerFeature > Error at updating Animal Husbandry skill for Charname > Data error (cyclic redundancy check). Edited October 31, 2017 by raidsoft Share this post Link to post Share on other sites
Posted November 2, 2017 Hey Aldur, Great app. Your work is very much appreciated! Q: (tl:dr entire thread) Is there a known issue when updating a critter that it does not recognize the Father and mother no longer exist? Or, was this fixed and I didn't notice? Thanks! Mal Share this post Link to post Share on other sites
Posted November 2, 2017 Hi Mal. I recall a fix so thay WA would not remove parents of creatures, even if they are dead. If that is what youre asking. Keenan confirmed that parent is still there, even if no longer shown on examine. Share this post Link to post Share on other sites
Posted November 2, 2017 1 hour ago, Aldur said: Hi Mal. I recall a fix so thay WA would not remove parents of creatures, even if they are dead. If that is what youre asking. Keenan confirmed that parent is still there, even if no longer shown on examine. I have been breeding using the old notion that if the parents die, the siblings are no longer siblings. I must be lucky, as the majority of my births are a straight transfer of traits. (that is, if there is an undocumented lineage that persists...) I've been doing it wrong and getting the right results. Share this post Link to post Share on other sites
Posted November 3, 2017 Same as me for couple years. Share this post Link to post Share on other sites