Posted August 9 Does lava adjacent to a highway cause catseyes to receive damage or pop? I have a single missing catseye on a highway tile running through a mine. The tile directly south of it was lava/freeze cast for easier removal, but left lava overnight. The missing catseye is on the northwest corner of the tile directly north of the lava cast. Share this post Link to post Share on other sites
Posted August 9 Just noticed this same thing happened on a second tile which was lava/froze, so I am certain this is the cause. Same positioning, same Northwest catseye missing. Whether it's intentional mechanic or a bug is for someone else to say. Share this post Link to post Share on other sites
Posted August 9 I ran into this issue a while back. It seems to happen when lava has been frozen from inside the mine, which leaves the corresponding surface lava active. In my case, I went back and froze the lava on the surface layer too. Afterwards, the problem did not recur. Share this post Link to post Share on other sites
Posted August 10 (edited) All the lava I have been casting & freezing has been at most about 24 hrs between a lava cast and the freeze cast. AFAIK none of the underground lava pillars have frozen. The catseyes seem to pop immediately on lava cast. Edited August 10 by munster Share this post Link to post Share on other sites
