Posted April 23, 2021 Tried to build low stone wall next to a 35 slope mine door - low stone wall is the only type of fence which assumed to not be restricted by usual fence slope limits. The toons used in the test: 1. Masonry 53, Carpentry 72 2. Masonry 60, Carpentry 34 Neither of them can build the wall, error is: "You are not skilled enough to build in such steep slores." Tried both with mallet and trowel. There is a building in front of the mine door and a stone mine door on the opening, these should not interfere. Further tests: Same error on an 51 slope entrance edge which also has a mine door but no house in front of it. No error if the entrance has no door attached, low stone wall properly started as expected. Screenshots in the spoiler. Spoiler Share this post Link to post Share on other sites
Posted April 23, 2021 (edited) based on masonry for stone walls think u need like 88. Edited April 23, 2021 by Trash Share this post Link to post Share on other sites
Posted April 23, 2021 27 minutes ago, Trash said: based on masonry for stone walls think u need like 88. Low stone walls are exempt of the slope requirement at mine entrances. https://www.wurmpedia.com/index.php/Maximum_slope Share this post Link to post Share on other sites
Posted April 23, 2021 I could build it on an entrance without a door so it seems the check is buggy somewhere and an entrance is not considered as an entrance if there is a door on it. Share this post Link to post Share on other sites
Posted April 24, 2021 Yes, you need to put the fence up first, then the door after. It makes more sense if it could be done at any time. but currently this is how it works. Share this post Link to post Share on other sites