Posted February 10, 2021 When trying to repair a double abutment, instead of repairing, it only repaves inspite of me clicking the repair option. Any tips? Share this post Link to post Share on other sites
Posted February 11, 2021 I was able to figure this one out! The first and more difficult option was to try repairing from the underneath of the bridge. This method worked somewhat, but the bridge is relatively low and I was able to reach it. Beware though, because if your bridge is on a sharp slope and you climb around it to reach the abutments and the climbing timer runs out, you will become trapped and be squished and die. This would likely only happen on 3+ tile bridges like ours though. I couldn't manage to reach the middle tile without climbing back there. The second and much better method is to simply remove the paving. Doing so will allow you to repair the bridge while standing on it. 1 Share this post Link to post Share on other sites