Posted September 27, 2020 I made a farm where some tiles flat on north side, 4 slope on south and west sides and 8 on east side. Maximum 8 slope from corner to corner but check still fails. I assume it a bug. both 4 on each border and flat top and bottom border and 8 sides works, illogical that it should not work as combination. Share this post Link to post Share on other sites
Posted September 27, 2020 I was always told that it was 8 diagonal slope was the max for farming, not 8 on an individual border. In your case, they would have been 12 diagonal slope during the first test, and 8 during the second and third, lining up with what I had heard. 2 Share this post Link to post Share on other sites
Posted September 27, 2020 (edited) Yeah, any two connecting sides added up must be 8 or less, so if you have an 8 slope side, it's two connecting sides must be 0 Edit: side = border. Edited September 27, 2020 by Wurmhole Share this post Link to post Share on other sites
Posted September 27, 2020 (edited) Yes checking from any corner the max slopes added up must not exceed 8 - in your case SE corner fails with 4 south and 8 east. TBH that should be increased - would result in less of those ugly flatraised fields. Edited September 27, 2020 by Jaz Share this post Link to post Share on other sites
Posted September 29, 2020 Slope is opposite, there is no more than 8 dirt height difference between any corner. Share this post Link to post Share on other sites