Sign in to follow this  
Alcatraz

Can't take large sign

Recommended Posts

I can't take large sign in my mine. I can't click on it and it's only visible from some angles. When I click on it from a distance and come closer, I see the whole menu, but no option works.

 

Thank you for help.

 

NsZOI2v.jpg?1

J4IjPyK.jpg

R2kJ0dk.jpg

lAejzlM.jpg

 

Share this post


Link to post
Share on other sites

 Do you have anything set in "Compatability Mode"? Will resetting back to pure Default Settings make any change (at least long enough to confirm it is NOT something like that)

Share this post


Link to post
Share on other sites

Have you tried to select it and take it via the select window?

Share this post


Link to post
Share on other sites
13 minutes ago, Brash_Endeavors said:

 Do you have anything set in "Compatability Mode"? Will resetting back to pure Default Settings make any change (at least long enough to confirm it is NOT something like that)

I tried the default settings and nothing change with my problem.

 

5 minutes ago, Cecci said:

Have you tried to select it and take it via the select window?

Yes I tried, but also doesn't work.

 

I can manipulate all other things, the problem is only with this one sign.

Share this post


Link to post
Share on other sites

just shooting ideas here? Have you tried binding a key to push and try pushing it a bit and see if you can select it then? 

Share this post


Link to post
Share on other sites

do you recall putting the sign there? Is it possible the sign is actually above ground but appears in your mine? Try putting the sign in your select bar and then going above ground to the tile above the sign and take from there.

  • Like 2

Share this post


Link to post
Share on other sites
9 hours ago, Brash_Endeavors said:

Does logging off for /lotimer make any difference?

No.

6 hours ago, McGarnicle said:

do you recall putting the sign there? Is it possible the sign is actually above ground but appears in your mine? Try putting the sign in your select bar and then going above ground to the tile above the sign and take from there.

Yes, I put it on a tile in the underground. When I put the sign in my select bar and try go to the surface, after a while the sign disappear from select bar.

Share this post


Link to post
Share on other sites
8 hours ago, Farmboy102 said:

just shooting ideas here? Have you tried binding a key to push and try pushing it a bit and see if you can select it then? 

Binding keys do not move with this too.

Share this post


Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
Sign in to follow this