Posted September 14, 2017 (edited) Open fireplaces are emitting thick smoke now on the new client which is quite disturbing on the upper levels in the houses (as these items are lit during all nights unlike forges and ovens). I propose to change the smoke from the fireplaces so a much thinner would be emitted from the firebox itself into the room where the fireplace is set. EDIT: looking at one post below, I agree: maybe no smoke at all. Unless we only have crap stove builders in Wurm... Maybe fireplaces above a certain ql do not emit smoke anymore? Edited September 14, 2017 by Jaz 3 Share this post Link to post Share on other sites
Posted September 14, 2017 +100 is there even a need for smoke from a fireplace? if stacked, vented and lit properly, there should not be any smoke into the room 1 Share this post Link to post Share on other sites
Posted September 14, 2017 +1 I personally don't mind the smoke, but for people who do mind it maybe somewhere in the options you can turn off the smoke or change how it looks (like making it thinner like Jaz said) 1 Share this post Link to post Share on other sites
Posted September 14, 2017 Should be able to snuff it and have it stay snuffed. Share this post Link to post Share on other sites
Posted September 14, 2017 Isn't that the settings for particles and effects or something like that? Share this post Link to post Share on other sites
Posted September 14, 2017 I wouldn't want to turn all particles off.... Share this post Link to post Share on other sites
Posted September 14, 2017 the effect is fine if this is on the top floor or single floor building, we built a hotel with 7 floors and I put fireplaces on every level at either end, its quite the roar and so much smoke on the floors above multiple fireplaces, not a very good look at all Share this post Link to post Share on other sites
Posted September 14, 2017 Not sure how hard it is to program, but making the fireplaces do a check and only emit smoke if there is a roof or open sky above them would be nice. Could copy that to everything that emits smoke, really. 1 Share this post Link to post Share on other sites
Posted September 14, 2017 Just remove smoke from open fireplaces Share this post Link to post Share on other sites
Posted September 14, 2017 Best option, put in a check that if there is not sky or cave ceiling tile on the structure level about the level the fireplace is on, to show smoke above it... if there's obstruction, remove it. Share this post Link to post Share on other sites