Posted September 7, 2017 (edited) I do all steeps ( I think so) that figure on wurmpedia and also follow some suggestions that I read in other threads. I tested hundred of times but my dedicated don´t show on public servers tab. I use my own PC and standard router. 192.168.101 is the ipv4 that I check when type ipconfig on CMD Router Ports config: Dedicated server config: Help please! Edited September 7, 2017 by Maelux Share this post Link to post Share on other sites
Posted September 7, 2017 (edited) Everything correct make sure that you have opened the Ports on the Windows Firewall too. Also be aware that some of the Ports need to go outside not inside. Like 8766 Edited September 7, 2017 by Sklo:D Share this post Link to post Share on other sites
Posted September 7, 2017 Thanks so much for answer Sklo 5 hours ago, Sklo:D said: Also be aware that some of the Ports need to go outside not inside. Like 8766 I assume that if I set the protocol option TCP/UDP in all ports, fixed this... right? 5 hours ago, Sklo:D said: make sure that you have opened the Ports on the Windows Firewall too All the same ports opened in router also are opened in windows firewall Share this post Link to post Share on other sites
Posted September 7, 2017 External and internal is not the same, change external IP to the ipdress from the outside. Go to http://www.minip.se to find out what it is. Share this post Link to post Share on other sites
Posted September 7, 2017 (edited) 26 minutes ago, Theodein said: External and internal is not the same, change external IP to the ipdress from the outside. Go to http://www.minip.se to find out what it is. Hi Theodein, When I do this and start the server, dedicated server application go down. Edited September 7, 2017 by Maelux Share this post Link to post Share on other sites
Posted September 7, 2017 4 hours ago, Theodein said: External and internal is not the same, change external IP to the ipdress from the outside. Go to http://www.minip.se to find out what it is. NO! External IP is the network card IP Internal IP is the loop back IP, 127.0.0.1 Share this post Link to post Share on other sites