Posted July 25, 2017 i'm not sure if this is a bug, so if someone could clarify so here is what is happening if have a mine set up close to a building site, that i'm working on, and then i close said mine, and go to clear the site for use, the ground where the mine once stood wont flatten, i have to go back inside the mine and "repair" it to be able to reflatten it above, now this is my best explanation this, i am using mods, yes and they were and are working fine, this wasnt an issue before the latest update. has this happened to anyone, or is it just me. i need to know if this is the case before i report it as a bug Share this post Link to post Share on other sites
Posted July 25, 2017 never used to happen before the last update, i should point out there is no reinforcing or walls inside, just stone. Share this post Link to post Share on other sites
Posted July 25, 2017 (edited) There is a hole inside. Seems natural to fill it (collapse), cause if you try to level down the surface above the hole the inside will become to low (for a person to be in). It's the same thing from inside you can't level up a mine ceiling, or mine forward/up if it is to near the surface. Edit: Not sure what last WU update was but if you have tile borders in the mine now, then there has been changes. Edited July 25, 2017 by Cecci Share this post Link to post Share on other sites
Posted July 25, 2017 yeah 1.4 x.x so yeah that's what is causing it then, at least i understand whats causing it thanks Share this post Link to post Share on other sites
Posted July 25, 2017 10 hours ago, ozmods said: i'm not sure if this is a bug, so if someone could clarify so here is what is happening if have a mine set up close to a building site, that i'm working on, and then i close said mine, and go to clear the site for use, the ground where the mine once stood wont flatten, i have to go back inside the mine and "repair" it to be able to reflatten it above, now this is my best explanation this, i am using mods, yes and they were and are working fine, this wasnt an issue before the latest update. has this happened to anyone, or is it just me. i need to know if this is the case before i report it as a bug What's the error message you get. Just "won't flatten" is not really useful information. Maybe add some screenshots too. Share this post Link to post Share on other sites
Posted July 26, 2017 doesnt matter now, i've repaired what needed to be fixed, i've learned from this experience, you dont get a message it just doesnt flatten out. note others dont build mines where you maybe plan to build later, thats all. Share this post Link to post Share on other sites
Posted July 28, 2017 To me it sounds normal. Ofc now we don't know if he worked with a pickaxe or his GM wand. But with a pick it is as intended. Share this post Link to post Share on other sites
Posted July 28, 2017 Gm wand, i only use pick, when im doing ore mining Share this post Link to post Share on other sites