Posted July 24, 2017 So there is good reason for not being able to cover a mine entrance with a bridge above ground, at least I think there is anyways, but why do we need the same rule set underground, currently it is not possible to connect a brdige directly to the mine entrance tile or adjacent underground which kinda kills the options for making something interesting. I recently removed my rock ramp into my mine and replaced it with a bridge, this free's up the tiles on either side of the old ramp that take up a fair amount of room, but I was stuck with leaving one of these in place due to not being able to connect a ramp adjacent to the mine entrance. Picture for the explanation follows: Share this post Link to post Share on other sites