[FIXED] Bridges can not be built when connected to buildings underground

[JakeRivers 2921]

So built 2 pottery brick extensions on my warehouse, the walls for under the ends of the bridge are solid with no openings.

 

When bridge planning is done is say's the walls are too weak to support the bridge, which has to be some form of bug.

 

 

[Wargasm 1898]

You shouldn't have to do this.... but try replacing the top two pottery brick walls with stone bricks (bash, rebuild), plan the bridge, build the bridge, then go back and bash the stone walls and replace them with pottery.

 

I'm also curious to know (and it might help them trace the bug) if you would still get this error if only one side of the bridge is supported by pottery brick walls.

[JakeRivers 2921]

I know how to make it work, but I am not bashing out those bricks and redoing them with stone then building a bridge and bashing out the stone and redoing it with pottery.

 

I will patiently wait for a fix.

 

I will test the round stone, slate, marble and sandstone on the test server later tonight.

 

I have never tried making a stone ramp on a wood building, so that could be the problem right there, the pottery walls maybe thinking they are really wood. 

 

scratch that, even the wood bridge is not showing as an option, just odd

Edited June 16, 2017 by JakeRivers

[JakeRivers 2921]

Works good on the test server, just not on live.

[JakeRivers 2921]

Okay tried another spot in the mine I had ready, this was 2 buildings with plain stone walls:

 

 

Same problem

[Alectrys 1945]

Verified that this is an issue on live, but not on test.  Opened a bug for the devs.

[Alectrys 1945]

Fixed with today's hotfix: http://forum.wurmonline.com/index.php?/topic/155256-hotfix-17jun17/