Posted January 27, 2017 Is there any way to remove "walls" of ground that i happened to make when used flatten? Share this post Link to post Share on other sites
Posted February 4, 2017 It sort of depends on what you are trying to do. If you want to get the slope back to what it was originally you would have to dig dirt from the edge of the lower clif side of the tile and drop it on the higher side and you could eventually get it back to what it was. If you want a quick and dirty "fix" you could use the flatten command on the edge of the lower cliff sides and the upper cliff sides (the ones running from the bottom to top of the cliffs) to start flattening those out and then stopping the action when you get it to where you like it. There is no undo function for the flatten commands unfortunately. Share this post Link to post Share on other sites
