Posted September 8, 2015 Like in topic - with the upcoming bridges release for DeedPlanner program, I am gathering as much data about bridges as possible - how to calculate total materials for bridges, what are the max acceptable slopes for all kinds of bridges etc. - any info will be appreciated and will help in development of DeedPlanner. 2 Share this post Link to post Share on other sites
Posted September 8, 2015 The material calculator for bridges can be downloaded here http://forum.wurmonline.com/index.php?/topic/122044-bridge-material-calc/ and some bridge designs are listed on the wiki too ;http://www.wurmpedia.com/index.php/Bridges. 1 Share this post Link to post Share on other sites
Posted September 8, 2015 water depth and height of the bridge is very important. extensions are resource intensive. Share this post Link to post Share on other sites
Posted September 8, 2015 If a flat bridge needs support pillars, it must be 80 over water. Found out the hard way... Share this post Link to post Share on other sites
Posted September 8, 2015 (edited) each house level is 33 slope tall with the floor built and the slope can not exceed 20 Edited September 8, 2015 by Kegan Share this post Link to post Share on other sites
Posted September 8, 2015 I mostly need info about arched bridges and rope bridges - Wiki almost don't have any informations about them. Share this post Link to post Share on other sites
Posted September 8, 2015 (edited) Why would we know more than you do? All we have are speculations and circumstantial experience, like how we thought for 7 years that Strongwall wasn't supposed to collapse support beams but then it turned out it was. Edited September 8, 2015 by Aeris Share this post Link to post Share on other sites
Posted September 8, 2015 Well i guess you could pm Tich and ask what you need to know might be faster then waiting on this 1 Share this post Link to post Share on other sites
Posted September 8, 2015 Don't know if this will help. The ground tile the bridge ends on has to be 10 dirt above the water. Also if you attach a bridge to a building every wall under it has to be a stone wall. No doors or archways or any wooden walls. All found out the hard way too. Share this post Link to post Share on other sites
Posted September 8, 2015 You are a dev, why don't you ask exact formula from colleagues? Share this post Link to post Share on other sites
Posted September 8, 2015 You are a dev, why don't you ask exact formula from colleagues? Share this post Link to post Share on other sites
Posted September 8, 2015 http://forum.wurmonline.com/index.php?/topic/128372-rope-bridge-woes-slopes-sagging/ Bridge calculator gives us a material needs per a section and potential combinations (http://forum.wurmonline.com/index.php?/topic/127754-possible-bridge-combinations/). For example, on flat bridges its seems all sections except the supports use the same materials regardless of height. The supports have more materials (called extensions although during construction there is nothing about "extension".) as they get higher. We could use information about minimum heights above dirt or water for the different bridges. Are there different minimum heights for different bridge sections?Is it for supports 5 above dirt or 80 above water level, whichever is higher? Is it above actual water or the water level? You can have dirt that is one shovel full above water so you'r actually above dirt. But 5 above that is less then 80 above water level. Share this post Link to post Share on other sites
Posted September 8, 2015 Don't know if this will help. The ground tile the bridge ends on has to be 10 dirt above the water. Also if you attach a bridge to a building every wall under it has to be a stone wall. No doors or archways or any wooden walls. All found out the hard way too. You can have a wooden wall under a wooden bridge. Share this post Link to post Share on other sites
Posted September 8, 2015 Don't know if this will help. The ground tile the bridge ends on has to be 10 dirt above the water. Also if you attach a bridge to a building every wall under it has to be a stone wall. No doors or archways or any wooden walls. All found out the hard way too. I don't think the planning tool should worry about this restriction anyway because you can bash the walls out and put back in whatever you want after the bridge is completed anyway. Share this post Link to post Share on other sites
Posted September 9, 2015 I don't think the planning tool should worry about this restriction anyway because you can bash the walls out and put back in whatever you want after the bridge is completed anyway. No. If you try and make a brick bridge to a wooden building the bridge planner won't even let you continue. You have to have the brick wall first. Then you can make the bridge. Then you can bash the walls. Has to be done in order or it says Share this post Link to post Share on other sites
Posted September 9, 2015 (edited) No. If you try and make a brick bridge to a wooden building the bridge planner won't even let you continue. You have to have the brick wall first. Then you can make the bridge. Then you can bash the walls. Has to be done in order or it says I am not talking about in-game things i am talking about Warlander's deed planner program. This post is gathering information so he can add in bridges properly to his deed planner and that is the planning tool i am talking about. Edited September 9, 2015 by Kegan Share this post Link to post Share on other sites
Posted September 9, 2015 Thanks for all info so far, here is a small bonus: 3 Share this post Link to post Share on other sites
Posted September 9, 2015 I am not talking about in-game things i am talking about Warlander's deed planner program. This post is gathering information so he can add in bridges properly to his deed planner and that is the planning tool i am talking about. Ahhhh, Right. Sorry dood. Share this post Link to post Share on other sites
Posted September 10, 2015 Another update in this topic, I will keep all future ones in DP thread: 1 Share this post Link to post Share on other sites
Posted September 10, 2015 Every time I re-size a map all the labels (I've only tired underground) disappear. Share this post Link to post Share on other sites
Posted September 10, 2015 Every time I re-size a map all the labels (I've only tired underground) disappear. Added to buglist. Share this post Link to post Share on other sites
Posted September 10, 2015 Just realized I put that in wrong post, oops. Thanks though Share this post Link to post Share on other sites
Posted September 10, 2015 Omg! Awesome work! (from the bridge capital at Colossus Lake, Independence - I have so many bridges by now I lost count.)The only thing I have noticed about arched bridges is that I was able to build a 6 tile arched stone bridge starting fairly close to water level (I havent counted but I imagine its like 20ish) - where I thought the limit was 5 tile bridges at that elevation. Share this post Link to post Share on other sites
Posted September 10, 2015 A arched bridge at 10 above water has a limit of 8 tiles. Share this post Link to post Share on other sites
Posted September 15, 2015 (edited) Some easy maths but some info. House heights in dirts. 33 + (30 x Additional Floors) HouseDirts Tall1st floor332nd floor633rd floor934th floor1235th floor1536th floor1837th floor2138th floor243 Edited September 15, 2015 by Audrel Share this post Link to post Share on other sites