Posted July 7, 2014 I've never played Wurm before and though I would try it, but this happens; http://prntscr.com/40cxpj Share this post Link to post Share on other sites
Posted July 7, 2014 Turn off GLSL shaders in the Compatibility tab in the settings Share this post Link to post Share on other sites
Posted July 7, 2014 deadspace invade wurm... I want to recruit those monstrosities. 3 Share this post Link to post Share on other sites
Posted July 7, 2014 Moved to Model Sounds and Bugs. Share this post Link to post Share on other sites
Posted August 1, 2014 I had the same issue, then i disabled GLSL shaders and now it's ok with models. But now i have this ground texture problem - http://forum.wurmonline.com/index.php?/topic/106932-weird-graphics-issue/ Please, help me. Share this post Link to post Share on other sites
Posted August 1, 2014 Are you playing on a laptop by any chance? If you are and you have a nvidia graphics card in it as well, turn back on glsl shaders and do the following: Rightclick the desktop and go to nvidia control panel. There, go to manage 3d settings and set preferred graphics card on nvidia. You dont have to change any other setting, just change the preferred graphics processor. This will only work if you have an nvidia card. If you only have an intel card in your laptop (or use the built-in graphics card from a desktop) I am afraid disabling glsl is the only option I know of. Otherwise, this option will let you turn glsl back on and have everything as it is suppose to work. Good luck!Viti 1 Share this post Link to post Share on other sites
Posted August 1, 2014 Thanks, but both of my PC's use Intel integrated cards.. Strange, that it works without any glitches on my older PC w/ outdated Intel G45(still unplayable because of low framerate) and there's only this model or ground texture problem on my new Laptop w/ intel HD4600.. Share this post Link to post Share on other sites
Posted August 3, 2014 I found updating my intel drivers solved the ground texture issue when I had it a few years ago. Share this post Link to post Share on other sites